Stop Fighting Your Mask. Join other Sleep Apnea Patients who are now sleeping soundly with Sleepweaver Advance, the only Soft, 100% Cloth CPAP mask.
Like a balloon, it gently inflates and softly conforms to your face to create a seal.
Reduced Air Leakage: The SleepWeaver is made of cloth and has no rigid parts that come into contact with the skin. It inflates to form a balloon of air that pushes gently against the patient's face to form a seal. Because the cloth is flexible and follows the exact shape of each individual patient's face, air leakage is reduced.
Reduced Pressure from Headgear: Very little tension is required in the headgear to achieve a good seal, which is formed by the air pressure inside the mask instead. Because the need to continually tighten the mask to achieve a good seal is eliminated, SleepWeaver users no longer experience pressure sores on the bridge of the nose or other parts of the face.
More Sleep Positions: SleepWeaver allows patient to sleep on their back, side, or stomach without rigid buckles, clips or faceplates digging into their skin. Because the mask is light and soft, it stays positioned all night even as the patient changes sleep positions. Users report waking up in the middle of the night and wondering if it is still on their face, only to find it gently and quietly in place.
No More Skin Irritation: The cloth material is very smooth and breathable. So while it forms a very good seal, it does not feel sticky or tacky on the skin and it does not create allergic reactions. There is nothing that goes inside of the nose to irritate or dry out the mucosal tissues inside the nose. The mask contains no latex or silicone.
Less Noise: CPAP mask noise comes from three sources: the exhalation valve, leaks and turbulence inside the mask. The SleepWeaver has a series of small exhalation holes that eliminate air "whooshing" or "whistling" sound. The mask fits with very few leaks, reducing the sudden air escape noises. And the mask is designed so that the air turbulence inside the mask is minimized, reducing the last source of mask noise.
Fitting the Mask
How to Fit Your SleepWeaverTM Soft Cloth CPAP Mask to Achieve the Best Seal
Your SleepWeaver Advance Mask is attached to headgear. The headgear has three adjustment points - one on each side of the mask and one on the Head Strap. A swivel connector attaches to the hose from your CPAP or Bi-Level machine.
Fitting the Mask
Remove your SleepWeaver Advance Mask from the packaging.
Connect the tubing from your CPAP or Bi-Level machine to the Swivel Connector on the front of the mask.
Turn on your CPAP or Bi-Level machine at your prescription pressure.
When the mask inflates, hold the headgear with both hands, position the mask on your nose, and pull the headgear over your head. Make sure that the cup of the mask is centered over your nose, and align the Head Strap to the center of your head.
Pull the headgear over the back of your head until the Neck Strap is snug just below your ears.
If you experience leaks, adjust the mask as described on the following page.
Lie down in your normal sleeping position. If any leaks occur, readjust the mask.
Adjusting for Leaks
If you experience leaks, try these steps:
With your CPAP or Bi-Level machine on and at your prescription pressure, pinch the portion of the mask directly over your nose, pull the mask slightly away from your face, towards your feet, and gently release.
If you experience leaks from the sides of the mask, adjust the Neck Straps by unhooking the tab from the strap and pulling the straps out to tighten the mask, then re-latching the tab to the strap.
If you experience leaks into your eyes, adjust the Head Strap.
At times it is possible to stop leaks and get a better fit by loosening the mask just a bit, then repeating Step 1.
If the above fails to make a good seal, please contact your home care provider or our Customer Care Department (724-858-2837) for further assistance.
SleepWeaver Mask users have sent us these tips that have made fitting much easier for them.
Tip # 1
I found that if I put the mask on before turning on the blower and making sure my nose was completely in the opening - then turning on the blower and making small tugs if there were any leaks worked best for me.
I have never been able to get rid of all the leaks if I start with the blower on.
I also went to a light weight hose to keep the weight of the hose from pulling on the Mask.
Tip # 2
I had an idea which seems to have panned out - which is relaxing the jaw while fitting the mask, since many people's facial conformations change once the jaw is relaxed. I tried the mask again last night, only I relaxed my jaw as I was fitting the mask. And it worked really well! Its comfortable, quiet and excellent for side sleeping!
Turn the machine on and position your nose in the opening comfortably. Then stop the machine. Hold the material at the top and bottom of the nose opening - with your nose in the hole - all the while pulling the material at the top and bottom in their opposite directions.
Then pull the material the opposite directions left and right - with your nose in the opening still. Make sure the elastic part is on the center of your forehead. Then turn the machine back on.
Tip # 4
Place mask on face without the machine.
Turn on air.
Pull mask down and away at a 30 degree angle.
Bring mask back to your face and push slightly. (this seems to seat it a bit more)
Wait just a minute or two - the mask begins to mold to your face and upon lying down, the little leaks disappear.
Service & Support
The manufacturer recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide an individualized patient equipment setup, clinical and after-sales support, and a program to assist patients with therapy success.
CPAP Clinic meets this set of requirements by providing you with the following services:
at-home visit for personal assistance and training
unlimited toll-free telephone support before and after sale
unlimited email support before and after sale
appropriate CPAP and Auto-CPAP set-up according to prescribed pressure setting
I have been researching online for the most reputable, supportive company from which to purchase my first CPAP machine. When I came across CPAP Clinic I was impressed with all of the testimonies ane decided to call them. Although I have not yet received my machine I am so impressed with the customer support and the bonus of price matching. Viberly was incredibly helpful and put my mind at ease with the decision I had made. Thank you Viberly and CPAP Clinic!!
Unbelievable service! We were a little apprehensive making such a large purchase online but due to this company having such a great rating with the BBB we decided to take a chance because the prices were the cheapest we could find anywhere, especially with their price match policy.
We placed our order and had a couple items for which we requested a price match, which was honoured, no questions asked! Our order was placed at 3:00 pm, by 4:05 pm we received the Canada Post tracking information!!! Order was received 2 days later in perfect condition. One item did not fit properly so when we inquired as to how/if we could make an exchange we were advised That they would be sending the replacement size with a shipping label to return the item that had to be returned. Within 10 mins we received the tracking information!!!! We have never seen service like his before and we will definately be referring others to this company and we will be regular customers without a doubt!!!!! Would not shop anywhere else!!!!
Just received my order in the mail . As previously it arrived timely and complete . The prices are competitive to other providers but cheaper than local stores
Will purchase again from this location.